Tabla de contenido
Publicidad
USB 3.0 Header
(19-pin USB3_4_5)
(see p.2, No. 12)
(19-pin USB3_6_7)
(see p.2, No. 13)
Infrared Module Header
(5-pin IR1)
(see p.2, No. 39)
Consumer Infrared Module Header
(4-pin CIR1)
(see p.2, No. 27)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.2, No. 41)
1. High Definition Audio supports Jack Sensing, but the panel wire on the
chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC'97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
X79 Extreme11 Motherboard
Besides four default USB 3.0
ports on the I/O panel, there are
two USB 3.0 headers on this
motherboard. Each USB 3.0
header can support two USB 3.0
ports.
This header supports an
optional wireless transmitting
and receiving infrared module.
This header can be used to
connect the remote controller
receiver.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.
47
Publicidad
Tabla de contenido
