Ostarz BT-Q1000X Guía De Instalación Rápida página 5

Beyond Navigation
................................................................................................................................................................................................................
and CSV file formats.
4. <File> \ <Clear Log>
Clear the data stored in the Travel Recorder.
5. <File> \ <Config GPS>
Configure the recording method of the flash memory of Travel
Recorder.
5.1 Connection Setting
I. Auto Scan GPS Module (Recommended)
The program will automatically detect the com port. It is
recommended to set to auto scan.
II. Manual Setting
Users can also manually set the port. Please refer to users'
manual for more detail information.
5.2 GPS Device Name (Unique ID)
Name your Travel Recorder here and your downloaded log
data will come with this unique ID
5.3 GPS Log Setting
There are 4 log modes: General mode, vehicle mode,
cycling mode, and hiking mode. Users can also change
the default setting of these 4 modes.
5.4 Data Log Memory
Overwrite:
When the memory is full, Travel Recorder will
Stop Log:
When the memory is full, Travel Recorder will
6. <File> \ <Download AGPS Data>
Update the AGPS data from internet assistance server to boost warm
start speed to 15sec.
Note1: A‐GPS can boost GPS warm start speed to always lower than
15sec fix after the first fix. The A‐GPS efficiency will decrease
................................................................................................................................................................................................................
www.Qstarz .com
keep logging by overwriting the memory
from the earliest point.
stop logging.
English
5