Ostarz BT-Q1000X Guía De Instalación Rápida página 7

Beyond Navigation
................................................................................................................................................................................................................
Before activating the Bluetooth function in your PDA/PC, please
switch BT‐Q1000X to <NAV> or <LOG> position for paring and check
if your device is equipped with Bluetooth function. If not, you may
need to acquire an optional CF/SD Bluetooth card or Bluetooth
dongle. (The pass code is "0000")
H‐2 Automatically create a shortcut in Bluetooth Manager
window
After the pairing complete, the system will then find a quick connect
device "Qstarz GPS" in Bluetooth Manager. In further use, you just
need to click it to connect to this Bluetooth GPS Receiver.
H‐3 Check the Serial Port in Bluetooth Setting
After complete pairing with BT‐Q1000X, please click "Serial Port" to
confirm the assigned COM port. If you use PDA/PC to pair the GPS
Receiver, please check "Outbound COM port".
H‐4 Set correct Serial Port in your map software
Activate your navigation software and make sure to select the
correct "Serial Port".
NOTE 1: In the map software such as TomTom, you might need to
change preference and set "Other Bluetooth GPS"
according to PDA/phone model. In some case please
consult map software company to vary the setting if you
have issue on positioning.
NOTE 2: There might be specific setting requirement per navigation
software. Such as Tomtom, please delete other GPS
settings under Tomtom software, and keep one only.
H‐5 Switch off the Bluetooth function
Switch off GPS function in your PDA/Smart phone/PC, then the
Bluetooth connection will be disconnected automatically. Then put
BT‐Q1000X switch to "OFF" position.
................................................................................................................................................................................................................
www.Qstarz .com
English
7