Stored Readings/Memory - Microlife PF100 Manual De Instrucciones

5.4. Stored Readings/Memory

Multiple readings can be taken during a
session, and the monitor will
automatically store the highest reading
from the session (1 session=1 on–off
cycle). This unit stores 240 readings.
Viewing the stored values
1. Switch the monitor on and press the
memory scroll buttons.
2. By pressing the < button, you can see
the latest value stored in the memory
with date and time. Continue to
depress the button to move quickly
through the memory.
3. The > button works in the opposite
direction.
Memory Capacity Low
When the memory reaches 230 or more
readings, MR XX will blink after the
monitor is switched on to indicate that
the remaining memory capacity is low.
Memory Full
When the memory has stored 240
results, the monitor will beep when
the unit is switched on and MR 240
will blink. From this point, a new
measured value will be stored by
overwriting the oldest value.
19