Care And Maintenance - Microlife PF100 Manual De Instrucciones

8.

Care and Maintenance

8.1. Cleaning the Mouthpiece and the Measuring Tube
Your peak flow mouthpiece and measuring tube should be
cleaned within 30 minutes after each use
1. Separate the air tube and
mouthpiece from the main body.
Disconnect the mouthpiece from
the measuring tube by moving it in
a forward direction.
2. Immerse the mouthpiece in a
prepared soap solution of water
and regular dishwashing soap.
Thoroughly clean by swirling in the
prepared soap solution. Thoroughly
rinse the mouthpiece with water
(distilled water is recommended).
Allow the device to air dry.
Note: Do not tap against hard
surfaces to avoid damage.
3. Now, immerse the measuring tube
in a prepared soap solution and
thoroughly clean by swirling in the
prepared soap solution. For
cleaning the measuring tube it is
best to use distilled water. Use
care not to damage sensitive parts.
Thoroughly rinse the measuring
tube with water. Allow the device
to air dry.
Measuring
Mouthpiece
Tube
25