Quick Start - Marmitek CONNECT 236 Modo De Empleo

Connecting directly to a TV
1. Plug the Scart cable into the corresponding input on your TV.
2. Plug the other end of Scart cable into the Connect 236 Scart output.
3. Plug your DVD Player, VCR, Satellite Receiver and Game Console, etc. into any of 5 Scart
inputs on the back of the scart switcher.
SCART (RGB)
INPUT SCART (COMPOSITE VIDEO)
COMPOSITE VIDEO (Ch6)

QUICK START

Example of a typical setup
The Connect 236 has been designed to connect up to six separate AV devices and output
their Audio/Video signal on the TV / Hi-Fi. Each device can be selected independently of each
other. Once a device has been connected, there is no need to remove any of the cables when
selecting an input.
1. Press the Power button to On
The back light of the LCD will fade in and the Connect 236 Scart switcher enters the
operation mode.
Press the button again and the back light of the LCD will fade out and the Connect 236
Scart switcher will switch off.
2. Press the < or > button to select a Channel
The LCD shows CH1, CH2, CH3, CH4, CH5 or CH6.
8
SCART SCART (COMPOSITE VIDEO)
(RGB)
YES YES
NO YES
NO YES
OUTPUT
COMPOSITE
VIDEO
YES
YES
YES
© MARMITEK