Hergom H-03 Manual De Instrucciones página 13

1.- INTRODUCTION
CLASSIFICATION OF VERSIONS:
 By size: H03/70 & H03/80
 If it has a fan: CONVECTOR
 If there is no fan: CONVENTIONAL
 If it features a double removable rear section:
DB
 If it features a double rear section and draw
control: DB/R
H-03/70-80 CONVENTIONAL FIREPLACE
This Fireplace provides heat by radiation; directly
heating walls, ceilings...
H-03/70-80 TURBOCONVECTOR FIREPLACE.
It is supplied fully assembled, ready to install and
connect to the chimney and air conduits, except
for the fan that can be installed easily following
the instructions included in this booklet.
It features a galvanised sheet metal enveloping
chamber for forced convection by means of a fan,
with upper outlets to distribute the air.
Adaptor Collar
Primary air
adjustment
The fan is controlled by an electronic module,
which
temperature captured by an NTC probe or
optionally by the user via a remote control.
The heat is provided by means of convection,
distributing the hot air to the different rooms,
and by radiation, directly heating walls, ceiling...
Secundary air
adjustment
Fig. 1
Primary air
andiron
13
is governed automatically
General features of the H03 Fireplace:
 Manufactured in Cast Iron
 High capacity fireplace capable of burning
logs up to 52 or 62 cm. long.
 Large glass pane on front door.
 Draw adjustment valve (Only in DB/R model)
 Primary air regulation valve located on the
fireplace door.
 Secondary air regulation valve.
 Self-cleaning glass pane.
 Removable deflector. (Easy access in order
to clean the chimney).
 Removable rear section and grille.
 Removable double rear section. (Only in DB,
DB/R and Turboconvector models)
 Removable ash pan

Removable grill
and bottom
by the
Removable
deflector
Removable
ash pan