Use of the freezer
Control Panel
F.
On/OFF light
G
Appliance button ON/OFF
H
Temperature setting button (warmest)
I
Temperature indicator
J
Temperature setting button (coldest)
K
Frostmatic light
L
Frostmatic button
M
Alarm reset light
N
Alarm reset button
F. Light ON/OFF
G. Button ON/OFF
ON:
Press the button (G) for the functioning of the
whole appliance. The pilot light (F) switches
on.
OFF: Keep press the button (G) until the pilot light
(H) and the temperautre indicator switched off.
38
F G H
I
J - L. Temperature setting buttons
The temperature can be adjusted between -15°C
and -24°C.
By pressing the button (H or J), the current
temperature setting flashes on the indicator. It is
possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature,
press button (H). To set a colder temperature, press
button (J). The indicator display the newly
selectedtemperature for a few seconds and then
shows again the inside compartment temperature.
The newly selected-temperature must be reached
after 24 hours.
Attention!
During the stability period by the first starting the
temperature displayed can not correspond to the
setting temperature. During this time it is possible
that the temperature displayed is lower than the
setting temperature.
J K L M N