PUREGEAR pureboom Manual Del Usuario página 3

Getting the Right Fit
You can adjust the PureBoom
Headphones by pulling up or down
on the headband until you find a
comfortable fit on your ears.
Connecting/Bluetooth Pairing
1. Make sure Bluetooth is turned ON
on your device.
2. Press and hold POWER button for 6
seconds to enter pairing mode. The
LED light will rapidly flash blue and
red when pairing.
3. Select "PureGear Headphones" from
the list of found devices.
4. When paired, the LED slowly
flashes blue.
4
Pairing Troubleshooting
1. When performing the pairing on a Bluetooth device
to detect the headphones, enter 0000 if your device
Adjustable
prompts you for a password during the pairing
process.
2. If the pairing is not successful, turn off the headphones
and perform the pairing connection according to the
Bluetooth Pairing steps on the previous page.
Note: To clear pairing history, hold the volume up/down
button for 12 seconds.
En
5