LEXIBOOK Retro TV Game Console Manual De Instrucciones página 5

Controllers
7
Directional buttons
8
SELECT button:
to select 1 or 2 players
(if available in the game)
Main unit:
Note: Make sure the TV and the main unit are
off before connecting.
1. Connect the cable of the power adapter to
the micro USB port
4
2. Plug the power adapter into an electrical
outlet.
3. Connect the main unit to your TV:
• Plug the yellow end of the AV cable into
the video jack of the main unit. Con-
5
nect the other end to the corresponding input in the TV.
• Plug the red and white ends of the AV cable into the audio jacks
other ends to their corresponding input in the TV.
4. Turn the TV on and press the POWER button
In order to show the image transmitted by the main unit, you must set your television to the input
Note:
jack being used. Input selection button may be located differently upon TV manufacturer and labeled
as: select, input, input select, line, line in, source, in, EXT or AUX.Please refer to your TV's instruction
manual for further information.
JG7800_09IM1147_101_V09.indb 5
9
MENU button: to go back to the game list
installation
of the main unit.
2
5
12
B and A TURBO buttons:
have the effect of pressing the
B and A buttons really quickly if
you just hold them down. Very
useful for some games!
10
START button
120V
of the main unit. Connect the
6
of the main unit.
11
B and A buttons
5/4/17 11:08 am