Camera Modes; Program Mode P - Metz SCA 3202-M7 Manual Del Usuario

on the camera's flash shoe:
• Screw the knurled nut of the adapter as far as
possible towards the head of the adapter case.
The locking pin in the adapter shoe is now fully
retracted into the case.
• Slide the adapter into the camera's flash shoe.
• Screw the adapter's knurled nut as far as possi-
ble towards the camera case to clamp the adap-
ter in position.
Some cameras (e.g. C-3000Z, C-3030Z,
C–3040Z, C-4040Z) have a 5-pin system
flash socket instead of the flash shoe. On
such cameras, the flash unit and the SCA
adapter are mounted on the flash shoe of the
"FLASH BRACKET FLBK01" (original Olympus
sytem accessory) and the camera is fixed on
the bar of the flash bracket. To connect the
flash bracket with the camera's flash shoe,
the flash sync cable "BRACKET CABLE
FLCB01" (original Olympus system accessory)
must be used.

2. Camera modes

For camera shutter speeds please refer to the
instructions given in Section 4.3.

2.1 Program mode P

The camera preselects a shutter speed/aperture
combination in conformity with the adjusted pro-
gram. The shutter speed selected by the camera
depends on the prevailing ambient light situation.
TTL flash exposure and TTL fill-in flash are auto-
matically controlled by the camera.
11