Safety Labels; General Safety Instructions - Miltenyi Biotec MACSQuant Tyto Manual Del Usuario

Protective conductor terminal. Symbol is attached on the inside of the instrument.
Information for service personnel.
Read the user manual first.
Order number
Type number
Serial number
Fuse
WEEE
Manufacturer
On (Power supply).
Off (Power supply).

Safety labels

Note the hazard points and safety symbols of the instrument. All safety labels and safety markings must be kept
clean and legible. Inspect the safety labels and safety markings regularly and replace them if not legible or
identifiable from a safe viewing distance. Contact Miltenyi Biotec for replacement labels.
Figure 1: Hazard areas and safety symbols on the rear side of the MACSQuant® Tyto® Cell Sorter.

General safety instructions

Safe operation of the instrument is no longer ensured if the instrument is not working properly and/or the
displayed instructions or messages advise you to contact Technical Support. Immediately switch off and unplug
the instrument from the power outlet and contact an authorized Miltenyi Biotec service provider or Miltenyi
Biotec Technical Support.
6
WARNING! Avoid serious injury. Read and understand operating instructions
before installing or use. If manual is missing, obtain replacement from
Miltenyi Biotec.