Rechargeable Battery; Programming Menu; Field Firmware Upgrades - flir K1 Inicio Rápido

RECHARGEABLE BATTERY

To charge, connect to an AC wall charger (5V/1A) via USB-C cable.
A full charge requires 6 hours. If the K1 is to be stored > 3 months,
charge to 70% and store at room temperature (recharge every 6
months). The battery is not user-serviceable.

PROGRAMMING MENU

• Short press the MENU button to access the menu system.
• Use the up/down buttons to navigate/scroll.
• Press MENU to select and confirm settings.
• Press RETURN to back up.
• Pull the trigger to exit.
• Main Menu: Key Lock (locks out all keys except for power, flash-
light, and trigger image captures), Image capture, Gallery (cap-
tured images), Image Adjustments (see below), and Settings
(see below).
• Image Adjustments Menu: Image Modes (thermal MSX® or
visible spectrum camera), Colors (display palettes), and Tem-
perature Scale (high/low sensitivity).
• Settings Menu: Measurement (Center Spot, Emissivity), Device
Settings (Screen brightness, Flashlight intensity, APO), and
General Settings (Temperature unit, Time/Date, Language, Sys-
tem Info, General System Info).
WORKING WITH IMAGES
Use the trigger to capture images. Go to Gallery in the menu sys-
tem. Use the arrows to scroll and MENU button to open images.
Press MENU at an opened image to see image options. To transfer
images, connect to a PC (USB) and use the K1 as you would any
external storage drive.
WARRANTY EXTENSION
See Figure 3, Product Registration QR Code, page 1.
Please register within 60 days of purchase to activate the 2–10 Year
Warranty extension (https://support.flir.com/prodreg), otherwise the
standard one-year warranty will be in effect from date of purchase.
The warranty extension covers parts and labor for the camera (2
years) and the detector (10 years).

FIELD FIRMWARE UPGRADES

Refer to the on-line user manual for complete instructions on up-
grading the K1 firmware in the field.
#NAS100022; r. AC/78132/78132; mul
3