Publicidad
Idiomas disponibles
Idiomas disponibles
Tighten the
skewer nut (not
the lever) against
the bicycle fork
with your hand,
but take care not to over-tighten. You will
need some play to close the skewer lever.
Slide the OverCenter
WheelStrap into the
Wheel Tray Track.
If your bicycle has
relatively narrow tires
and rims, install the
rim adapter onto the
OverCenter WheelStrap.
If you're riding fatter,
"off-road" tires, do not
use the rim adapter.
LOADING YOUR BIKE continued
Then close the skewer by flipping the lever 180
about halfway through closing you should start to
feel resistance. Take care not to over-tighten the
lever, but be sure the forks fit snuggly on the skewer.
Tighten
Closing the skewer should take firm pressure—
enough to leave an impression on your palm. If the
skewer is too loose or tight, open the skewer and
adjust it by turning the nut, not the skewer lever.
SECURING THE WHEEL
1
With the buckle
lever in the open
position, loop the strap
over rim and tire:
Insert strap under the
2
red trigger and push
through.
Move the buckle lever
3
to the closed position.
• To release the
WheelStrap, press the
red trigger button and
pull the strap out.
Install End Caps
1
• The strap is properly tight
• IF TOO LOOSE: Move
• IF TOO TIGHT: Push and
2
3
About the Accessory Lock Housing...
If you wish to use the Accessory Lock Housing to secure
3
your equipment, SKS Lock Cores are available separately
and may be matched to other Lock Cores you already have
or wish to buy. Use the Accessory Lock Housing to secure
the ForkBlock or the rear Wheel Tray to the Crossbar.
2
Follow the instructions that come with the Accessory Lock
Housing.
o
. At
Close
if it requires "firm"
pressure to close the
buckle lever.
lever to the open position
and push more strap
under the red buckle.
hold down the red trigger
button and pull strap out.
!
Always secure
the wheel to the
tray before
driving away!!
Publicidad
