König Electronic P.SUP.NBT130KN Manual De Usuario página 2

POWER UP YOUR NOTEBOOK COMPUTER
1. You can connect your notebook computer (or any other appliance
that work within the offered output voltages and output power range)
with this power supply by connecting the supplied detachable
adaptor plug.
2. Determine proper connector size. The polarity of the small
connectors is pre-set with positive tip polarity. Common symbol is
shown as follows:
3. Set the DC voltage selector at the desired voltage position. (ie. 12V
at 8A or 15V/16V/18V/19V/20V at 6A or 22V at 5A) before you
connect it to your notebook computer. You may fi nd the required
voltage setting in your original AC adaptor or in the computer
user's manual (PLEASE NOTE THAT AN INCORRECT VOLTAGE
SETTING CANNOT POWER UP YOUR NOTEBOOK COMPUTER
AND CAN DAMAGE YOUR COMPUTER. IF YOU ARE UNSURE,
NEVER TRY TO CONNECT IT WITH YOUR COMPUTER.
CONSULT WITH YOUR LOCAL DEALER!!!).
4. Make sure the total connected load does not exceed the rated
output current of the power supply.
5. Connect the power cord to the power supply fi rst and then insert AC
plug into your wall socket. The LED indicator will light instantly.
6. Switch on your computer.
7. Please note: The LED indicator will come on and stay on only when
set on any voltage.
POSITIVE TIP
POLARITY
2