Using A Micro Sd Card - Aukey DR02 Manual De Usuario

Toggle screen
view and turn
off the screen
Reset
Short press to restart the device (this won't affect saved files)
Button
There are 3 screen view options– Dual view, front camera, and rear camera.
When dash camera is powered on, press the OK button to switch views or switch
off the screen (recording continues). 'Screen Saver' setting can also be used to
automatically switch off the screen after 1 or 3 minutes.

Using a Micro SD Card

The camera doesn't include internal storage and requires a micro SD card (Class
10+ recommended and 128GB Max supported) to function. A 128GB micro SD
card should store around 20 hours of 1080p recordings. Use a high-quality, branded
card for maximum reliability. Insert a micro SD card into the front camera micro
SD card slot. Later, when the camera is powered on, format it ('Format' option
in Dash Camera 'Setup') to prepare the card for first use in the dash camera.
Formatting will permanently erase any data on the micro SD card. For best
performance, format periodically (after backing up any important files). 'Format
Warning' in 'Settings' can be switched on to remind you to do this.
Installation & Powering On/Off
The diagram below shows the parts and exact way the cables must be connected.
You may wish to connect and test the dash camera system before proper, long-term
installation in your vehicle. For convenient testing in your home, a power bank
or wall charger with 1A or 2A USB port can be used instead of the car charger.
Enter / Confirm
- 06 -
Play / Pause