Operation - Klarstein ESPRESSIONATA GUSTO Manual Del Usuario

EN
24
NOTE: You may hear a noise ("a bubbling sound") while rinsing the
appliance for the first time. This is normal, as the appliance releases air. After
about 20 seconds the noise will disappear.
10 The appliance now begins to heat the water.
1 1 The indicator WATER lights up when the water is hot enough to prepare the espresso
and the heating stops.
12 Press the button again.
13 Let the water flow for 60 seconds to rinse the appliance.
14 Press the button again to end the operation.
15 Pour the water from the vessel and the drip tray into the sink. Do not drink it or use it
for any other purpose.
16 Clean the vessel, drip grid and drip pan thoroughly and dry them.
Now the appliance is ready to prepare Espresso!

OPERATION

Operating the Control Panel
Button (steam):
Press to heat liquids with hot steam or froth milk. Unpress (re-press) the button to stop.
Button (water):
Press the button to let the appliance pump water from the water tank through the filter
outlet, unpress to stop.