Preparing Beverages - Klarstein ESPRESSIONATA GUSTO Manual Del Usuario

EN
26

PREPARING BEVERAGES

Preheating the Appliance
To make a cup of good Espresso, we recommend preheating the metal components
of the appliance and the coffee cup. That way the flavour of the Espresso will not be
influenced by cold components.
NOTE: Do not put any coffee into the steel mesh when preheating. It is not
required for this step.
1 Press the button to turn off the appliance.
2 Remove the water tank from the appliance.
3 Fill it with water. The water level must not exceed the MAX mark.
4 Carefully reinsert the tank into the appliance.
5 Place a coffee cup on the drip grid.
6 Make sure that the steam knob is at position 0 and the button
accidental scalding.
7 Press the button to turn on the appliance.
8 Press the button . The appliance will start pumping water from the water tank.
9 When water starts flowing out of the outlet, re-press the button
10 The appliance now begins to heat the water.
1 1 When the indicator WATER lights heating has finished.
12 Press the button again to fill the cup.
13 Press the button to turn off the unit.
14 Pour the water from the cup into the sink. Dry the vessel, drip grid and drip pan.
15 Place the cup back on the drip plate and start brewing.
is off to prevent
to stop.