Troubleshooting; Spare Parts - oventrop Datalog CS-BS-1 Manual De Uso E Instalación

8

troubleshooting

Problems with the direct connection to a gigabit network device
Problem Solution
When a device is
connected directly to
the Datalog CS-BS-1
using a gigabit network
Î Alternative A: Interconnect a 100 MBits switch
adapter, no network
between the two devices.
connection is estab-
lished.
Î Alternative B: Set the network connection settings
of your computer to 10 MBits/s half-duplex.
User password not available
Problem Solution
The user password is When the user password is not available, the Datalog
not available. CS-BS-1 has to be reset to its factory settings in order
to regain access to the web interface.
Note
Not all network interface cards support 10
MBits/s half-duplex communication.
Note
When the Datalog CS-BS-1 is reset to its fac-
tory settings, the configuration will be erased.
9

Spare parts

S-Bus cable, 1.50 m
Mains adapter 100 ... 240 V~ (12 V ,1A max)
29