allen+roth TPPER9117 Manual De Instrucciones página 11

ASSEMBLY INSTRUCTIONS
13. Attach the assembled top beams (D1/D2) to
the arc beams (B1/B2) using bolts (DD) and
plastic washers (FF), tighten with wrench (JJ).
Place cap (HH) on the bolt heads.
Note: Don't attach the assembled top
beams (D1/D2) to the holes on the outside
of the arc beams (B1/B2).
Hardware Used
DD
FF
HH
JJ
D1
D1
D2
13
11
HH
DD
FF
D1
B2
B1 D2