allen+roth TPPER9117 Manual De Instrucciones página 6

ASSEMBLY INSTRUCTIONS
2. Insert the connectors (E1) to the beams (C1),
secure with bolts (AA) and plastic washers (FF),
tighten with wrench (JJ). Place cap (HH) on the
bolt heads.
Hardware Used
AA
FF
HH
JJ
3. Attach the ferrule (F1) to the beam
assemblies (C1/E1).
4. Attach the beams (C2) to the beam assemblies
(C1/E1/F1) and secure with bolts (AA) and
plastic washers (FF), tighten with wrench (JJ).
Place cap (HH) on the bolt heads.
Hardware Used
AA
FF
HH
JJ
2
HH
AA
FF
3
C1
4
6
E1
C1
F1
E1
C2
F1
C1
HH
AA
FF
C2
F1
C1
HH
AA
FF