allen+roth TPPER9117 Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS
8. Attach the arc beams (B2) to the arc beam
assemblies (B1/E2/F1) and secure with
bolts (AA) and plastic washers (FF), tighten
with wrench (JJ). Place cap (HH) on the bolt heads.
Hardware Used
AA
FF
HH
JJ
9. Connect the assembled arc beams (B1/B2)
to posts (A1/A2) through the holes on the posts
using bolts (BB) on a flat, non-abrasive surface.
Tighten all bolts with Allen Wrench (LL).
Stand the assembled structure of posts (A1/A2)
and arched beams (B1/B2) up with two people.
Hardware Used
BB
LL
10. Attach the beams (C1/C2) to the posts (A1/A2),
secure with bolts (AA) and washers (EE), tighten
with wrench (JJ). Place cap (HH) on the bolt
heads.
Hardware Used
AA
EE
HH
JJ
8
B1
9
LL
BB
A1 A2
A1
10
B2
B1
A1
A2
8
HH
AA
FF
B2
F1
LL
BB
B1 B2
B1
A1
B2
A2
B2
B1
A2
C1
EE
AA
HH
HH
AA
FF
C2