Yakima RPL,SNGL,FATCAT 4 EVO BLACK Manual De Instrucciones

SKS* LOCK CORe iNStaLLatiON
CONteNtS
Control Key
(flat edge)
Use a key to dislodge
the black plastic plug
from the lock housing.
Use the inserted
key to install the
You may need to rotate the small hole inside the
locks into the lock
lock housing so that the point on the lock core will
housings.
align.
On some housings,
you must rotate the
moving parts behind the housing.
Refer to the rack or accessory instructions.
Push the core all the way into the
housing. Hold the core with the tip of
your thumb as you pull out the flat-
edged Control Key. The lock should
remain in the housing.
Use the locking keys
to LOCK UP.
Record Your Key Number:
(located on the set of locking keys)
*SKS refers to the Yakima Same Key System. Refer to your Yakima
rack or accessory instructions for Yakima's Limited Lifetime Warranty.
1033631A-1/6
Lock Locking Keys
Core
Insert the
flat-edged Control Key
into the lock core.
imPORtaNt—
NOTE: If you wish to remove the core,
the lock must be in the unlocked
position, and you must use the flat-
edged Control Key. Insert the Control
Key completely to pull the core out.
Part# 1033631 Rev.A
SKS LOCKS ReGiStRatiON
REGISTER YOUR SKS LOCK WITH US TODAY!
Registration will allow us to help you in the future with a replacement key
if you misplace or lose them.
REGISTER ONLINE:
To register your SKS key with us go to:
http://www.yakima.com/warranty
Enter in the product name, your first and last name, street address, city,
state/postal code, and country. Don't forget to give us the key code from
your SKS key you can input this into the SKS Key Code box directly at the
web link above.
THROUGH THE MAIL:
Fill out and mail the coupon to:
Yakima Products, Attn: SKS Registration,
15025 SW Koll Pkwy., Beaverton, OR 97006
First Name
Last Name
Street Address
City
State/Province
SKS KEY CODE
Send coupon to:
Yakima Products, Inc.
15025 SW Koll Parkway
Beaverton, OR 97006
Now...take it easy and enjoy your Yakima Product!
1033631A-2/6
Zip/Postal Code Country