How To Use - Audio-Technica AT-ART1000 Manual De Usuario

The product is extremely delicate. Handle it with sufficient care.
1
Mount the product onto your headshell.
• Mount the cartridge with the protector
on to avoid damaging the vibration
system.
• Temporarily tighten the screws.
• A headshell is unnecessary when
attaching the product to an integrated
tone arm. Attach it directly to the
tone arm.
9

How to use

Protector
Green (right channel / -)
Red (right channel / +)
Lead tip
2
Connect the lead tips, noting output polarity.
• Connect headshell lead tips to the product
output terminals of the same color. If a
lead tip is loose, flatten it out slightly and
reconnect it to the output terminal.
• Never apply heat (from solder, etc.) to
the output terminals.
Screw
Blue (left channel / -)
White (left channel / +)