Audio-Technica AT-ART1000 Manual De Usuario página 37

Adjust arm height.
7
• Adjust the height so that the bottom
surface of the headshell and the
record surface are parallel, as seen
from the side. An improper arm
height may cause the body of the
product to make contact with the
record and could impair audio
quality or damage the record.
• Depending on the tone arm/turntable
being used, you may not be able to
adjust arm height.
• You need a transformer, head amplifier, or standalone phono equalizer to connect
to a preamplifier/amplifier. If the preamplifier/amplifier has a phono input (MC
position), it may be used as it is. However to fully take advantage of this product's
audio quality, using a step-up transformer (sold separately), head amplifier (sold
separately), or phono equalizer (sold separately) is recommended. For connection
instructions, refer to the user manual of the equipment you are connecting.
Adjust anti-skating.
8
• If the anti-skating of the tone arm is
not properly adjusted, the channel
balance will be degraded. Follow
the instructions in the arm's or
phonograph's user manual and be sure
to make the proper adjustments for the
product.
JA
EN
FR
DE
IT
ES
PT
RU
KO
CN
TW
12