Segway ninebot miniPRO Inicio Rápido página 2

For your safety, the miniPRO will limit the max speed to
4.3 mph (7 km/h) until you complete the New Rider
Tutorial. For the first 0.6 miles (1 km) after completing
the New Rider Tutorial, the max speed will be limited to
6.2 mph (10 km/h), after which you can disable the
speed limiter via the App and reach a max speed of
10 mph (16 km/h).
Install App and register/login.
1
3 Click "Search again" to connect to your
miniPRO. Then select your device from the
list at the bottom of the screen.
The miniPRO will beep when the connection
is successful. The Bluetooth icon will stop
blinking and remain illuminated.
Follow the App instructions to learn how to
ride safely. Have fun!
Wear an approved helmet
and other protective gear to
minimize any possible injury.
2 Power ON the miniPRO. The Bluetooth
icon blinking indicates the miniPRO is
waiting for a connection.
≥4m
≥4m
1
Go to a large open area 2 Place one foot on the
and ask a friend to assist foot mat, with your other
you on your first ride. foot still on the ground
holding your weight. Do
WARNING
not press the steering
Always step on from the
bar with your leg.
back of the miniPRO.
4 5
Stand with your weight Gently lean your body
evenly distributed on forward and backward to
both feet and relax, control your movement.
looking straight ahead.
WARNING
If the miniPRO sounds an alarm or tilts back, slow down!
3 Slowly transfer your weight
onto the miniPRO. The unit
will beep, indicating it is
now in balance mode.
Slowly step on with your
other foot.
6
To turn, gently lean
left or right against
the steering bar.
Complete the New Rider Tutorial
then enjoy your ride!