Yakima KingPin 2 Manual De Instrucciones página 4

LOAD LARGEST OR
HEAVIEST BIKE FIRST.
• Always load first
bike with chain
away from vehicle.
• Compress cradles
against stabilizer.
Pull straps tightly over frame,
hook into place.
FOLD MAST DOWN TO ACCESS THE REAR:
• Unload the bikes.
• Release safety pin and wire-lock.
Pull wire lock.
FOLD CARRIER ARMS WHEN NOT IN USE.
• Release wire lock,
pull pin out.
• Fold arms.
• Replace pin and
wire-lock.
1033249D-4/15
The straps can
be routed under
the cables.
directions to avoid
Release pin.
Stabilize
the bike
frame in
the cradle
Arrange
bikes for best
stabilization.
LOAD
REMAINING
BIKES.
Alternate bike
interference.
Stabilize bike,
secure with straps.
Safety pin and wire-lock
must be in place.