Yakima KingPin 4 Manual De Instrucciones página 3

insert tongue into vehicle's
hitch receiver.
iF spare tire caUses
iNterFereNce, DO NOt
Use this prODUct!
align the holes in the receiver to the
holes in the tongue.
extend carrier arms:
Release wire lock, pull pin out.
attach one rubber strap to each
cradle and stabilizer.
1033601B-3/15
install large bolt, lock-
washer, and washer.
Install bolt from right side of receiver.
tiGhteN with adjustable wrench.
raise arms...
cradle positioning:
To slide cradles along the
carrier arms, close cradle
stabilizer
and stabilizer.
close cradles while
loading bikes.
push the safety clip
onto the exposed end
of the bolt.
replace safety pin
and wire-lock.