Yakima KingPin 4 Manual De Instrucciones página 4

Load largest or heaviest bike first.
The straps
routed under
the cables.
• Pull straps tight, diagonally
over frame, hook into place.
Load additional bikes.
• Alternate bike directions to
avoid interference.
• Use Long Strap to secure
bikes to carrier's frame.
• Secure loose strap end.
long strap
Fold carrier arms when not in use.
• Release wire lock,
pull pin out.
• Fold arms.
• Replace pin and
wire-lock.
1033601B-4/15
1033601B-4/15
wheel strap
• Always load first bike
with chain away from
vehicle.
• Always use cradles
closest to vehicle.
• Use Wheel Strap to
secure rear bike's front
wheel to it's frame.
can be
• Secure loose strap
end.
Fold mast down to access the rear:
• Unload the bikes.
• Release wire-lock and safety pin.
Pull wire
lock.
A Yakima Tube-
Top (see cover
page) may be
required to carry
your bike safely.
Failure to load bikes
properly can result
in property damage,
personal injury, or
death.
Bikes should be as level as possible to avoid
ground clearance issues and possible ejections.
Release pin.
Safety pin and wire-lock
must be in place.
Stabilize the
bike frame in the
cradles. Arrange
bikes for best
stabilization.