PUREGEAR pureboom Manual Del Usuario página 4

Connecting/BluetoothPairing
1. TURN ON the PureBoom Earbuds
by simplyseparatingthe
magneticends.
2. Make sure the PureBoom Earbuds
are within 2-3 feet/ .6-.9 meters of
the device you will be connecting to.
3. Turn on your device's Bluetooth.
Most devices will automatically
detect your PureBoom earbuds.
Locate and select "PureBoom".
It will indicate that your earbuds
are now connected or paired.
• If your device does not
automatically detect your
PureBoom earbuds, make
sure Bluetooth is turned on,
do a SEARCH for PureBoom
and then click Connect.
Notes:
To shut down, press the
MFB for 5 seconds. (Or
simply connect the earbuds
on the magnetic ends.)
Once paired, the range is
approximately 32 feet/10
meters.
Your PureBoom will
automatically connect
to the last paired and
connected device when
it is turned on again.
PairingTroubleshooting
1. When performing the pairing on a Bluetooth device to
detect the earbuds, enter0000 if your device prompts
you for a password during the pairing process.
2. If the pairing is not successful, turn off the earbuds.
Reattach the earbuds and perform the pairing connection
according to the Bluetooth Pairing steps.
PairingwithaSecondDevice
Lets say you're using your phone and your laptop and don't
want to use the speaker for sound. When you pair both
those devices to your PureBoom, you experience the
following situation: If a call comes in on your phone while
you're watching a movie on your laptop, the PureBoom
Bluetooth connection will pause the movie and connect
to the phone call automatically.
1. To connect your earbuds with a second device, turn off
Bluetooth on the first device.
En