Pairing; Auto-Reconnect; Volume Control; Calling - LG HBM-260 Manual Del Usuario

How to use

Pairing

- Before using the headset for the fi rst time, it must be paired with a Bluetooth
enabled device.
- There are 2 pairing modes with the HBM-260.
1) Easy Pairing
a) Press and hold the POWER button for 3 seconds to turn on the HBM-260.
b) The headset will enter auto-reconnect mode for 10 seconds.
(If your headset has already been paired with a device, the headset will
automatically reconnect to the device when the HBM-260 is powered on.)
c) After 10 seconds, the HBM-260 will automatically enter pairing mode.
d) When the headset enters pairing mode, the LED indicator will show a solid
white light.
e) Using your handset, fi nd the Bluetooth menu and "search for" or "add" new
devices.
f) Select "LG HBM-260" from the list of devices to pair it with your device.
g) If you are asked for a passkey or PIN during pairing, please enter "0000"
(4 zeros).
h) Once the devices are paired, you will hear "Headset paired".
i) After pairing has been completed, make sure you "connect" to the
LG HBM-260.
j) If you want to pair with a different device in the future, the headset must be
placed into pairing mode.
k) If the headset is in pairing mode for 3 minutes without being connected to a
device, the HBM-260 will automatically turn off.
2) Manual Pairing
a) With the power off, press and hold the POWER button for 6 seconds.
b) Continue pairing process from letter e above.
6

Auto-reconnect

- If the HBM-260 is turned off (either accidentally or intentionally) while connected,
the headset will disconnect form the device.
The headset and handset will automatically reconnect when the HBM-260 is turned
back on (provided that both devices are within the required range of 33 feet (10
meters)).
Out of range
- When the connected device and the HBM-260 are separated by a range of 33 feet
(10 meters) or more, the headset will alert the user with a beep, and the headset
and device will disconnect.
When the device and the HBM-260 are within the required range again, the HBM-
260 will automatically reconnect to the handset.
- If the headset and device do not automatically reconnect when they are back within
the required range, briefl y press the CALL button on the HBM-260 to reconnect
manually.
- While trying to reconnect, your headset will beep and the LED indicator will fl icker
twice every 5 seconds.
- If the headset does not reconnected within 60minutes, it will be turned off.

Volume control

- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.
- There are eight levels of speaker volume.

Calling

Answering a call

- When there is an incoming call, the headset will ring.
- Briefl y press and release the CALL button to answer the incoming call.

Making a call

- If you make a call from the connected handset, the call will (depending on the
phone settings) automatically transfer to the headset. If the call is not automatically
transferred, you can manually transfer the call by briefl y pressing the CALL button on
the HBM-260 (handset and headset must be paired).
How to use
7