Product Description - BONAIRE Durango 3100 Manual Del Propietário

Do not use the power cord with an adaptor plug that converts the 3-pin plug into a 2-
-
prong connector.
If the power cord is damaged, it should be replaced by a service agent or qualified
-
personnel to avoid risk of bodily injury or property damage.
Remove the plug from the electrical receptacle by pulling on the plug and not the cord.
-
Use only qualified electricians for replacement or servicing of switches, or electrical
-
motors and components in this cooler.
If damaged, discard cooler or return to an authorized service facility for examination
-
and/or repair.
WARNING:
Always unplug the power cord from the wall outlet receptacle when the air cooler is not
-
in use, before adding water, before cleaning, before removing cooling pad, before
maintenance and replacing parts, or before moving to another location.
Do not plug the cord into electric outlet with wet hands or an electric shock may result.
-
The same applies for unplugging.
Never wash the unit cabinet with a garden hose. water may harm the motor and electrical
-
system.
Never attempt to disassemble or alter the product in any way not instructed by this
-
manual. Shock, fire, or bodily injury may occur.
Do not allow children to operate or service this cooler.
-
WARNING:
Stagnant water may cause bacterial growth and serious health problems. Do not allow
stagnant water to remain in the tank.
Drain and clean the water tank before storage, after seasonal use and whenever the unit
-
is not in daily use.

2. Product Description

The Evaporative Air Cooler is an efficient, energy-saving product. It cools by combining water
evaporation with air movement, through carefully designed and manufactured equipment,
providing maximum efficiency and safety.
The evaporative cooling technology is very economical and gives a number of additional
benefits compared to traditional air conditioning systems for homes and businesses. The
system does not use refrigerants or compressors; it cools by simply moving air through a surface
composed of specially designed evaporative cooling pads.
Heat from the inlet air is absorbed by the water. The resulting outlet air temperature drops
when the water transforms into gas. Humidity is not perceived, since the air in the room is
renewed approximately every two minutes, while a comfortable cooling effect is created.
Continuous air circulation is a vital aspect of the evaporative cooling process used in this
equipment and gives it a distinct advantage over air conditioning by refrigeration.
4