Publicidad
Step 12
Step
Carefully stand your unit upright.
å
Insert four PIVOT HINGES (15H) into four WASHERS (9I) and
å
into the BOTTOM (F) and SHELF (G).
Insert the PIVOT HINGE, which is fastened to the DOOR (I), into
å
the hole in the TOP (E). You will need to tilt your DOOR slightly.
Now, tip the DOOR in and fasten the free PIVOT HINGE to the
å
DOOR. Use a BLACK 9/16" LARGE HEAD SCREW (1S).
NOTE: To make adjustments to the DOOR, loosen the SCREW in
å
the HINGE, make needed adjustments, and tighten the SCREW.
Repeat this step for the remaining DOORS.
å
(4 used)
Page 16
I
15H
BLACK 9/16" LARGE HEAD SCREW
9I
1S
(4 used in this step)
418667
Pro Tip: Lift with your
legs. And, you know,
your arms.
E
G
F
www.sauder.com/services
Publicidad
