Installing Your Vga Card; Read Me First - ATI Radeon Sapphire ML00042-R5 Manual De Instrucciones

Installing Your VGA Card

Preparing Your Computer
Before installing your VGA Card we recommend that you first uninstall the driver for
your current video card and reconfigure your operating system to use the standard
display driver (VGA) supplied with your operating system. For more information about
changing to the VGA driver see your operating system documentation.
Turn off the power to your system and discharge your body's static electric
charge by touching a grounded surface-for example, the metal surface of the
power supply-before performing any hardware procedure.
The manufacturer assumes no liability for any damage, caused directly or
indirectly, by improper installation of any components by unauthorized service
personnel. If you do not feel comfortable performing the installation,
Damage to system components, the accelerator card, and injury to yourself
may result if power is applied during installation.
Now that you have prepared your computer, you are ready to install your VGA Card.
To Install Your VGA Card
Display Cable

READ ME FIRST

consult a qualified computer technician.
Video Output
Connector
Power Supply
Power off the computer and monitor, then
disconnect the display cable from the back
of your computer.
Remove the computer cover.
If necessary, consult your computer's
manual for help in removing the cover.
(Remember to discharge your body's
static electricity by touching the metal
surface of the computer chassis.)
5