Installation Of The Appliance; Important - Springer BC-127 Manual Del Usuario E Instalación

All manuals and user guides at all-guides.com
Build the framework, fixing the four parts. Put and fix the frame
onto the wall through 6 fixing points (3 upside and 3 downside).

INSTALLATION OF THE APPLIANCE

screw
safety screw located on the right hand side lateral part of the same.
lateral.
with three screws at the base and two screws at each lateral beam.
slope of the base is 0.5 blister (1 cm).
put the safety screw located in the straight lateral part of the
appliance back on.
between the framework and the appliance to avoid air flow between
the external and the internal environments.
procedure.

IMPORTANT

1) Once the installation ended, confirm the slope of the appliance is correct.
2) To reduce the cable length:
- withdraw the plastic front..
- adjust the cable length, arrange the remaining cable on
- to detach the metallic base of the appliance, unscrew the
- join the two lateral beams to the base with a screw in each
- fix the metallic set (base and beams) to the framework,
NOTE: before resuming the installation, be sure that the
- slide the appliance on the metallic base all the way and
- arrange the restraining foam to the lateral and upper parts
- fix the molding on the wall to finish the installation
5