Installation Of The Appliance - Springer DC - R Manual Del Usuario E Instalación

INSTALLATION OF THE APPLIANCE

10 mm
safety
pitch
screw
Build the framework, fixing the four parts. Put and fix the frame
onto the wall through 6 fixing points (3 upside and 3 downside)
- remove grille side screws (2).
- gently pull grille out and upward, removing it from chassis. Set
grille aside.
- remove chassis shipping screw located on the right side of unit
- with another person firmly holding back of casing slide chassis
out of casing.
- install casing in wall
NOTE: unit casing should project 4,5 cm into room to assure proper
fit of grille.
5