Pioneer SE-MJ771BT Manual De Instrucciones página 17

7. Vocal communication
To use the wireless headphones for vocal communication, pairing must be performed
with the desired Bluetooth device using the "hands-free profile" (HFP) or "headset
profile" (HSP).
For details on how to perform pairing, see P.10.
* If the Bluetooth device supports both profiles HFP and HSP, use the profile HFP.
(1) With power to the wireless headphones' turned off, hold the ( ) button depressed for
about three seconds.
The headphones' power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to.
When pairing is completed, the wireless headphones will automatically connect to
the Bluetooth device.
* If automatic connection is not achieved, or the headphones automatically connect to a
different Bluetooth device than the one you wish to use, follow the instructions for the
desired Bluetooth device regarding manual connection.
Vocal communication controls
If the connected Bluetooth device supports AVRCP, the following operations can be used.
Press once
( ) button : Increase volume.
( ) button : Decrease volume.
( ) button
Press once when receiving a message : Enables conversation.
Press once again to end conversation.
Press and hold when receiving a message : Refuse communication.
Press twice : Performs redialing.
* When sound volume is set to maximum or minimum levels a beep sound will be pro-
duced from the headphones.
* Sound volume can be adjusted on the matching Bluetooth device.
* Depending on the specifications of the connected Bluetooth device, the controls noted
above and controls on the Bluetooth device may not be supported.
* Depending on the specifications of the connected Bluetooth device, the phone settings
may need to be configured. Consult the user's manual for the Bluetooth device.
13
En