Publicidad
Idiomas disponibles
Idiomas disponibles
3.2.
Selecting a menu
To enter one of the menus available to the user; click
on the corresponding icon; on entering them, each
menu (depending on the one selected) will allow you
to browse the various pages or enter other sub-menus
linked to specific functions.
4.
FUNCTION MENU
4.1.
Navigating the menu
This menu is used to set operating functions for the
unit. The following keys are used to navigate this
menu:
(
) Move back to the previous page
1
(
2
) Move on to the next page
(
3
) Go back to the higher level menu
(
4
) Go back to the main page
To access a function, click on the text of that
function.
NB: while navigating the menu pages, the current page of the selected menu will be displayed in the
header (i.e. in the darker upper area).
4.2.
Setting the operating mode (Mode)
after accessing the "Mode" function, you can choose
one of the modes available by clicking directly on the
text that identifies it and then confirming with the
"OK" key.
NOTES:
1.
Before changing the operating mode, the unit must be OFF, otherwise a message will warn you to
turn the unit off before changing the mode.
2.
If the water tank for this model is not installed (and correctly set) (refer to the installation manual
for more information), the only modes available will be " Heat" and "Cool".
3.
If the relative function is activated (paragraph 8.3), the value of this parameter will be stored in the
memory and automatically reset after any possible voltage failure.
4.
The default value for this parameter is: "Heat".
16:41
Function
Parameter
3
1
Mode
Heat
Hot water
Cool + hot water
OK
2017-05-04 Fri.
View
Commission
General
4
Heat + Hot water
Cool
Cancel
2
9
Publicidad
Capítulos
