Inspection And Maintenance Schedule - Gude KS 400-41 V Traducción Del Manual De Instrucciones Original

ENGLISH
38

Inspection and maintenance schedule

General
Before starting each job
After each job
Storage
Entire saw
Plastic body
Saw chain
Saw guide bar
Sprocket
Chain brake
Clutch
Saw chain
Saw guide bar
Chain lubrication
Chain brake
Deceleration brake
On-off switch
Oil tank cap
Saw guide bar
Guide bar mount
Chain oil tank
Saw chain / saw guide bar
Entire saw
Regularly clean the exterior.
Have them checked regularly by a specialist workshop.
Check for breaks and cracks.
Re-sharpen regularly.
Clean regularly.
Clean regularly.
Check proper functioning regularly.
Check proper functioning regularly. (Chain must not
move when idling).
Check for damage and sharpness.
Check chain tension.
Function test.
Function test.
Function test.
Function test.
Check for leaks.
If there is any damage, arrange for repair in a specialist
workshop.
Clean oil inlet bore.
Clean, especially the oil guide groove.
Empty.
Dismantle, clean and lightly oil. Clean the guide groove
of the saw guide bar and attach the scabbard.
Store cleaned and serviced saws safely in a dry room out
of the reach of children.
After prolonged storage, have the saw checked in a
specialist workshop (residual oil can become waxy and
clog the oil pump valve)