Technical Data; Emergency Procedure | Symbols | Maintenance | Disposal | Guarantee | Service - Gude GRK 2534.1 BSL Traducción Del Manual Original

Deutsch
ENGLISH
30

Technical Data

Mitre-box saw
Art. No
Mains voltage
Mains frequency
Motor power (P1)
Engine speed
Cutting range (bei 45°/45°)
Cutting range (bei 45°/90°)
Cutting range (bei 90°/45°)
Cutting range (bei 90°/90°)
Saw blade tooth width
Saw blade dia. x hole dia
Blade teeth
Dimensions L x W x H
Net/gross weight
Noise details
Measured values determined according to EN 62841.
Sound pressure level L
Measured sound power level
Guaranteed sound power level L
Measured according to EN 62841; Uncertainty K =
The values stated are emission values and as such do not necessarily constitute values which are safe for the
workplace. Although there is a correlation between emission levels and environmental impact levels, whether
further precautions are necessary cannot be derived from this. Factors in uencing the actually present environ-
mental impact level in the workplace include the characteristics of the work area and other noise sources, i.e.
the number of machines and other neighbouring work processes. The permitted workplace values can likewise
vary from country to country. This information is intended to assist the user in estimating hazards and risks.
WARNING
The noise emission level given in this information sheet has been measured in accordance with a standardized
test given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary
assessment of exposure.
The declared noise emission level represents the main applications of the tool. However if the tool is used for
different applications, with different accessories or poorly maintained, noise emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to noise should also take into account the times when the tool is swit-
ched off or when it is running but not actually doing the job. This may significantly reduce the exposure level
over the total working period.
Wear ear protectors.
Exposure to noise can cause hearing loss. Identify additional safety measures to protect the operator from the
effects of noise such as: maintain the tool and the accessories and organization of work patterns.
pA
WA
2 dB (A)
GRK 2534.1 BSL
55258
230-240 V
50 Hz
S6 2000 / 1600 W
4800 1/min
42 x 340 mm
78 x 240 mm
23 x 340 mm
78 x 340 mm
2,8 mm
255 x 30 mm
60
1040 x 560 x 730 mm
17 kg / 20 kg
90 dB (A)
90 dB (A)
103 dB (A)