6
Put your Executive in the most centrally-
located room of your home. It should be
on a level surface against an interior wall. Make
sure it's at least two inches from the wall so the
humidistat (on the cord) can accurately read your
humidity
.
More about positioning:
•
To maximize humidity circulation, put your unit near a cold air return.
•
If you prefer to put your unit in the room where humidity is most
needed, you can! But the humidity won't circulate as well with this
method.
•
Don't put your humidifier under a window, as condensation may occur.
•
Put the unit on the bottom floor of a multi-story home.
7
Put the fan assembly on the cabinet.
Make sure the float makes a solid
connection with the fan switch inside the fan
assembly. The fan switch looks like a small, silver
diving board.
8
Fill your water bottles, then tighten the
caps with your hands, making sure the
caps are correctly threaded. Do not overfill the
bottles. Your Executive holds 5.7 gallons of water.
Note: Each bottle holds 2.75 gallons per bottle. The right bottle will
empty first, putting .2 gallons of water into the cabinet. At that time, you
can refill the right bottle to get the full 5.7-gallon capacity and maximum
run time.
4