Simple Time And Mini Sweep; Multifunction - gc 30 M Manual De Instrucciones

SIMPLE TIME & MINI SWEEP
To set the time:
1. PULL out crown to position 2.
2. TURN crown either way to correct time.
3. PUSH back crown to position 1.

MULTIFUNCTION

TWO- EYE DAY DATE
To set the time:
1. PULL out crown to position 2.
2. TURN crown clockwise to correct time.
Day and date will also change.
3. PUSH back crown to position 1.
To set date:
1. PULL out the crown to position 2.
2. TURN crown clockwise to correct date.
3. PUSH in crown to position 1.
NOTE: Press inset pusher A with a pointy object to "quick change" date. Do not use this pusher between 11:30
p.m. and 5:30 a.m.
To set the day:
1. PULL out the crown to position 2.
2. Advance time 24 hours to change the day.
3. PUSH back crown to position 1.
NOTE: Press inset pusher B with a pointy object to "quick change".
THREE-EYE DAY/DATE/SECOND TIME ZONE
To set the time:
1. PULL out crown to position 2.
2. TURN crown clockwise to correct time.
Day and date will also change.
3. PUSH back crown to position 1.
To set the second time zone:
1. SET the crown to position 1.
2. PRESS pusher B step by step to advance the hour
hand of the second time zone until the desired time
is set.
3. stop pressing the button after finishing the setting.
NOTE: when using pusher B to set the second time zone
hour, the centre minute hand must be set to between 55th
minute and 5th minute at any hour.
To set the day and date:
All manuals and user guides at all-guides.com
5