ACCUMULATED ELAPSED TIME MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher A to stop timing
3. PRESS pusher A to restart timing
4. PRESS pusher A to stop 2nd timing
5. PRESS pusher B to reset
SPLIT TIME MEASUREMENT:
1. PRESS pusher A to start timing of the first and second events
2. PRESS pusher B to stop and record the timing of the 1st event
3. PRESS pusher B to catch up to the timing of the 2nd event
4. PRESS pusher A to stop the timing of the 2nd event and record the time
5. PRESS pusher B to reset. All stopwatch Chrono hands return to '12' and '0' position.
2,6,10 THREE-EYE CHRONO 1/5 SEC
NOTE:
Crown position 'A', 'B' and 'C'
Pushers A (Top right) & B (Bottom right)
6 o'clock eye –Day counter
10 o'clock eye – Minutes elapsed up to 30 minutes
2 o'clock eye – Permanent second hand
THIS CHRONOGRAPH WATCH HAS 3 FUNCTIONS:
Time, Calendar, Stopwatch
TIME:
To set the time:
1. PULL crown to position 3.
2. TURN crown either way to correct time (same for Day when this function is available).
3. PUSH back crown to position 1.
CALENDAR:
1. PULL crown to position 2.
2. TURN crown clockwise to correct calendar.
3. PUSH back crown to position 1.
STOPWATCH:
This stopwatch is capable of measuring:
Chrono Hours elapsed up to 12 hours (6 o'clock eye)
Chrono Minutes elapsed up to 30 minutes (9 o'clock eye)
Stopwatch seconds up to 1 minute (Big second hand)
Before using the stopwatch, reset the stopwatch Chrono hands to the '12' and the '0' position.
STANDARD STOPWATCH MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher A to stop timing
3. PRESS pusher B to reset
ACCUMULATED ELAPSED TIME MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher A to stop timing
3. PRESS pusher A to restart timing
4. PRESS pusher A to stop 2nd timing
5. PRESS pusher B to reset
SPLIT TIME MEASUREMENT:
1. PRESS pusher A to start timing of the first and second events
2. PRESS pusher B to stop and record the timing of the 1st event
All manuals and user guides at all-guides.com
8