Three-Eye Chrono - gc 30 M Manual De Instrucciones

ACCUMULATED ELAPSED TIME MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher A to stop timing
3. PRESS pusher A to restart timing
4. PRESS pusher A to stop 2nd timing
5. PRESS pusher B to reset
SPLIT TIME MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher B to 'split'
3. PRESS pusher B to begin again
4. PRESS pusher A to stop
5. PRESS pusher B to reset
TIMING 2 COMPETITORS:*
1. PRESS pusher A to start timing of 1st event
2. PRESS pusher B to stop timing of 1st event; stopwatch continues to run internally
3. PRESS pusher A to start timing of 2nd event
4. PRESS pusher B to view time of 2nd event
5. PRESS pusher B to reset

3,6,9 THREE-EYE CHRONO

NOTE:
Crown position 'A', 'B' and 'C'
Pushers A (Top right) & B (Bottom right)
6 o'clock eye – Hours elapsed up to 12 hours
9 o'clock eye – Minutes elapsed up to 30 minutes
3 o'clock eye – Permanent second hand
These instruction also apply to the 6, 9 Two-Eye
Chronograph movement. Please note that the only
difference is that such movements do not have second
eye.
THIS CHRONOGRAPH WATCH HAS 3 FUNCTIONS:
Time, Calendar, Stopwatch
TIME:
To set the time:
1. PULL crown to position 3.
2. TURN crown either way to correct time (same for Day when this function is available).
3. PUSH back crown to position 1.
CALENDAR:
1. PULL crown to position 2.
2. TURN crown clockwise to correct calendar.
3. PUSH back crown to position 1.
STOPWATCH:
This stopwatch is capable of measuring:
Chrono Hours elapsed up to 12 hours (6 o'clock eye)
Chrono Minutes elapsed up to 30 minutes (9 o'clock eye)
Stopwatch seconds up to 1 minute (Big second hand)
Before using the stopwatch, reset the stopwatch Chrono hands to the '12' and the '0' position.
STANDARD STOPWATCH MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher A to stop timing
3. PRESS pusher B to reset
All manuals and user guides at all-guides.com
7