Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
Safety harness is a body holding device intended to be used in fall protection systems described in
EN 363 standard. The harness is certified and complying with the standard: EN 361:2002 - full body
harness intended to be used in fall arrest systems; EN 358:2018 - work positioning belt to be used with
work positioning equipment; EN 813:2008 - sit harness to be used in suspension with rope access
systems and work positioning. The maximum load of the sit harness is 140 kg. Harness are made of
polyester webbings.
1.
Shoulder strap
2.
Shoulder
adjusting aluminium
buckle
3.
Frontal attachment
aluminium D-ring -
for attaching a fall
arrest system
4.
Shoulder
connecting webbing
5.
Frontal
a t t a c h m e n t
aluminium
and loops – can be
used as a sit harness
according to EN 813 (do not use this buckle to attach a fall arrest system)
6.
Lateral belt attachment aluminium D-rings. Can be used only to attach work positioning systems
according to EN 358
7.
Work positioning belt strap
8.
Work positioning belt strap adjusting aluminium buckles
9.
Thigh straps
10. Thigh straps connecting/adjusting aluminium buckles
11.
Dorsal attachment aluminium D-ring - for attaching a fall arrest system
12. Crossing plate
13. Dorsal strap adjusting aluminium buckle
14. Belt pad
15. Tool loops
16. Identity label
HARNESS MARKING
e
a
c
b
l
ALFA 5
70 - 110 cm
FULL BODY HARNESS
Ref. 27975/76
EN 361:2002
EN 358:2018
EN
strap
straps
waist
buckle
g
j
k
f
Date of manufacture:
MM.YYYY
Serial number:
XXX XXX
d
a - Device type
b - Model symbol
c - Reference no.
d - European standards
e - CE mark and number of the notified
body supervising the manufacture of
i
h
the equipment f - Month and year of
manufacture
Size:
S-L
g - Harness serial number
XXL
h - Harness size
i - Caution: read the manual
j - Identification of the harness manufacturer
or distributor
k – Max. permissible limit load for use as
a sit harness.
l – circuit of the safety belt
Publicidad
