Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
12
INSTALLING THE BULB
•
Read all of the instructions carefully and retain for future reference.
•
Before installation, please unplug this appliance.
Needed tools: 1 Phillips screwdriver
1
Open the cartons, take out the unit and
bulb. Place them on a table.
3
Take out the resin log cover.
5
Screw down the resin log cover with two
screws. Finished. Plug the appliance and
work as usual.
2
Use the screwdriver, screw off the two
side screws on resin log cover.
4
Insert the bulb under the roll.
Publicidad
Tabla de contenido
