Olimpia splendid CALEO METAL Instruccioes Para La Instalación, Uso Y Mantenimiento página 26

38. The most common cause of overheating is deposits
of dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging the
appliance and vacuum cleaning air vents and grilles.
39. Do not use abrasive cleaning products on this
appliance. Clean with a damp cloth (not wet) rinsed
in hot soapy water only. Always remove plug from
the mains supply before cleaning.
40. Do not connect the appliance to the mains voltage
until completely assembled and adjusted.
41. Switch off and use handles where provided when
moving (fig. 2).
42. Do not immerse the appliance in water or in other
liquids. Short circuits or fires may occur.
43. Do not let the appliance work in enclosed areas such
as a cabinet since it could cause a fire.
44. If the appliance's plug is incompatible with the
socket, have the socket replaced with a suitable
one by a qualified technician, who must ascertain
that the section of the socket cables is compatible
with the power absorbed by the appliance. We do
not recommend using adaptors and/or extension
cables. If they cannot be avoided, however, they
must comply with current safety regulations and
their ampacity (A) must not be below the maximum
ampacity of the appliance.
45. Do not use the appliance in case of malfunctioning or
faults, if the cord or plug are damaged, or if it has been
dropped or damaged in any manner. Turn the appliance
off, disconnect the plug from the socket and let it be
checked by professionally qualified personnel.
EN- 8