Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 7: CONNECT SUPPLY LINE
A:
CHOOSE THE CORRECT ADAPTER
Try attaching adapters to the water supply valve then inserting
the adapter thread-side first into the metal nut.
B:
THREAD THE METAL NUT ON
CLICK SEAL
CONNECTOR ONTO
®
THE WATER SUPPLY VALVE.
Tighten ½ turn beyond hand tight.
C:
GENTLY TURN CLICK SEAL
CLOCKWISE*
The "click" lets you know it's sealed!
D:
SLOWLY TURN ON WATER AT THE
SHUTOFF VALVE*.
Note: Carefully check for leaks at shutoff
valve. If leak appears, tighten nut just
enough to provide a leak-free joint.
*
DO NOT OVERTIGHTEN. DO NOT USE TOOLS ON PLASTIC NUT OR PLASTIC FILL VALVE.
Overtightening and/or the use of tools could cause damage and lead to failure of the nut and/or
fill valve. Such damage may not be visible to the eye. Failure of the nut and/or fill valve can lead to
significant water leakage and water damage.
12
NUT
®
STEP 8: FLUSH THE TOILET
A: FLUSH THE TOILET
If you're satisfied with the flush, YOU'RE DONE!
YOU DID IT!
We knew you could!
Share your success story
with friends and family!
#FixedMyToilet
#Fluidmaster
13
Publicidad
