Publicidad
Idiomas disponibles
Idiomas disponibles
countdown repeat mode (REP-00).
10.When finished making all the settings,
press S4 button to confirm.
TO USE THE TIMER
In countdown stop mode (Cd-STOP),
1. Press S1 button to start counting.
The timer icon will appear.
2. To stop counting, press S2 button.
Press S1 button to resume from
where it left off.
3. To reload the timer, press S2 button
to stop counting, and then press S2
button again to reload the timer to
the preset value.
4. After reaching zero in a countdown,
a beep sound will be emitted and
the timer icon will blink for 10
seconds. The timer will then be
reloaded to the preset value.
In countdown up mode (Cd-UP),
1. Press S1 button to start counting.
The timer icon will appear.
2. To stop counting, press S2 button.
Press S1 button to resume from
where it left off.
3. After reaching zero in a countdown,
a beep sound will be emitted and
the time icon will blink for 10
seconds. The timer will
start counting up simultaneously.
4. Press S2 button once to stop
counting. Press S2 button again to
reload the timer to the preset value.
In countdown repeat mode (REP-00),
for time value < 1 minute:
1. Press S1 button to start counting.
2. To stop counting, press S2 button.
Press S1 button to resume from
where it left off.
3. After reaching zero in a countdown,
a beep sound will be emitted for 1
second. The timer will repeat
counting at the preset value
simultaneously.
4. Press S2 button once to stop
counting. Press S2 button again to
reload the timer to the preset value.
for time value > 1 minute:
1. Press S1 button to start counting.
2. To stop counting, press S2 button.
Press S1 button to resume from
where it left off.
3. After reaching zero in a countdown,
a beep sound will be emitted and
the timer icon will blink for 10
seconds. The timer will repeat
counting at the preset value
simultaneously.
4. Press S2 button once to stop
counting. Press S2 button again to
reload the timer to the preset value.
NOTE: In countdown repeat mode, the
maximum number of repetition is 100
(REP-00 to REP-99).
NOTE: When timer beep sound is emitted,
press any button to disable the beep
sound.
TO SELECT AND SET ON/OFF THE
ALARM
Alarm time
Alarm (1 - 5)
1. Press S3 button to select ALARM
mode.
2. Press S2 button to select from
ALARM 1 (AL-1) to ALARM 5 (AL-
5). Each alarm can be set as
different modes - time alarm,
altitude alarm or pressure alarm.
3. Press S1 button to toggle between
on and off of the alarm. If the alarm
is on, the alarm icon will appear.
All manuals and user guides at all-guides.com
TO SELECT THE ALARM MODE OF INDI-
VIDUAL ALARM
1. In individual alarm (AL-1 to AL-5),
press and hold S4 button for ap-
proximately 3 seconds. The message
"Time-AL" will be displayed.
2. Press S1/S2 button to select time
alarm setting mode (Time-AL),
altitude alarm setting mode (ALTI-
AL) or pressure alarm (BARO-AL).
3. Press S3 button to enter into each
setting mode.
4. Press S4 button to return to ALARM
mode.
TO SET THE TIME ALARM
In time alarm setting mode,
1. Press S1/S2 button to set the hour
digits. Holding down the button will
speed up the process.
2. Press S3 button once, the minute
digits will blink. Press S1/S2 button
to set the minute digits.
3. Press S3 button to set the time
zone. Press S1/S2 button to toggle
between T1 and T2 time zones.
4. When finished making all the
settings, press S4 button to return
to ALARM mode.
TO SET THE ALTITUDE ALARM
In altitude alarm setting mode,
1. Press S1/S2 button to set the
altitude value (in units M (meter) or
Ft (feet)). Holding down the button
will speed up the process.
2. When finished making all the
settings, press S4 button to return
to ALARM mode.
NOTE: When altitude arrives or over the
set value, a beep sound will be emitted
for 20 seconds. Then the alarm will be
deactivated automatically.
NOTE: The altitude value can be set from
-1600 ft. (-500m) to 29500 ft. (9000m).
TO SET THE PRESSURE ALARM
In pressure alarm setting mode,
1. Press S1/S2 button to set the
pressure value (in units mbar
(millibar) or Ft (feet)). Holding down
the button will speed up the
process.
2. When finished making all the
settings, press S4 button to return
to ALARM mode.
WHEN AN ALARM GOES OFF
When any alarm alerts, press any button
to stop the alarm.
NOTE: Individual alarm will automatically
be activated after being set.
TO SHOW THE TEMPERATURE
Temperature
Time
1. Press S3 button to select
TEMPERATURE mode.
2. Press S1/S2 button to toggle
between ºC and ºF.
TO SET THE OFFSET
In TEMPERATURE mode,
1. Press and hold S4 button for approxi-
mately 3 seconds, the temperature
value will blink.
2. Press S1/S2 to offset the
temperature value (in units ºC or
ºF).
3. When finished making all the
settings, press S4 button to return
to TEMPERATURE mode.
NOTE: The temperature offset range is
+/- 5 ºC or +/- 10ºF.
ENGLISH
NOTE: The temperature measuring range
is -10 ºC - 60 ºC or 14 ºF - 140 ºF.
NOTE: If the measured temperature value
is out of measuring range, the tempera-
ture value will be shown as "---".
NOTE: For accurate air temperature, the
watch must be off the wrist.
To reduce carbon foot print, these
SHARK instructions are printed with
soy inks on recycled paper.
Publicidad
