Technical Data; Scheduled Maintenance - GBD AGO Instrucciones Para La Instalación

AGO

TECHNICAL DATA

Maximum length of the gate
Maximum weight of the gate
Stroke
Power
Power supply
Absorption
Max. thrust
Operating temperature
Opening time
Use frequency
Thermal protection
Lubrication

SCHEDULED MAINTENANCE

Description
Photocells cleaning
Control of gate hinges and supports,
balancing of the gate
Controlling the sensitivity of
electronic friction (torque adjustment)
of the control board
Controlling degree of protection
Monitoring current dispersion
Control of signals
AGO 400 AGO 600
4.0 m 5.0 m
300 kg 300 kg
40 cm 60 cm
330 W
180 W
220/230 V 220/230 V
1.5 A
1.5 A
1600 N 1600 N
-25°C +60°C
-25°C +60°C
22 sec. 33 sec.
30%
30%
150°C 150°C
Grease
Grease
Frequency
Monthly
as needed
Semiannual
Semiannual
Annual
Semiannual
AGO 424E
4.0 m
250 kg
40 cm
70 W
24 Vdc
0.5 - 5.5 A
1500 N
-25°C +60°C
22 sec.
90%
-
Grease
Entrusted Operation
Clean with damp cloth
Operator
Check the status of welds and
corrosion.
Operator
Unhook the engine and check the
balancing and the eventual points
of friction
Check the adjustment of the couple
Technician
as described in EN 12453 - EN 12445
Check that there are no traces of
Technician
moisture or water inside electrical
casings
Verify that the dispersion of current is
Technician
less than 7.5 A
Verify that the safety warning signage
Operator
is complete and intact
13
UK
AGO 624E
5.0 m
250 kg
60 cm
70 W
24 Vdc
0.5 - 5.5 A
1500 N
-25°C +60°C
33 sec.
90%
-
Grease